Industrial Automation

Control System CM3000 Cutter Controller

Approx Price: Rs 21,000 / Set 
CM3000 is the latest of Shanghai KINWAY displayed rich cutter control system with simple operation.Mainly used in flat sheets programmable paper cutter.Cutter paper with DB100 AC servo control contrast VVVF way to significantly enhance positioning accuracy and speed of feed.

  • ARM9 one machine touch screen instead of PLC + HMI programs to reduce the system cost and response time;
  • Integrated design, greatly simplifying the peripheral power, relay configuration, reduce ancillary components of the plant, to further improve the system reliability;
  • Overhaul interface to help provide fault information. Reduce cutter the difficulty of maintaining and the time to failure;
  • Open parameter settings.The controller is applied to the cutter on the market with wide versatility;
  • Operation of high technology and security requirements. The system need to verify the password to help improve the safety of equipment;
  • Registration code improves the cutter manufacturer of customer management. If registration number is lapse , the system does not work
  • Instructions online. Inspection at any time, the operator will no longer use the skills of blind spots;
  • Bright eye-catching colors and interface design make our products more accessible and enhance the image of the whole facility.


  • Mains Supply: AC 24 V±10%, 50/60 Hz, 100 W
  • Lifter Motor: 24 V DC Motor
  • Control Box: -10 - 60
  • HF Cable: -55 - 200


Temperature PID Controllers

Approx Price: Rs 10,000 / Unit 
  • Accuracy: F.S. ±0.5%(Except T3S)
  • High accuracy measurement: F.S. ±0.5%
  • NTC sensor type: -40.0 to 99.9°C(-40 to 212°F), RTD sensor type: -99.9 to 99.9 °C(-148 to 212°F)
  • Automatic switching function of 5 point temperature indication: Indication type only
  • High function/High performance PID control: Convenient parameter setting (by DAQMaster)

Analog and non-indicating type, set temperature by dial:
  • Non-indicating type
  • Setting temperature by Dial

Dual PID control board type:
  • High quality and economical product
  • Convenient organization of panel to use

Solid State Relay/ Power Controller

Approx Price: Rs 5,000 / Unit 
  • Action Principle: Electronic Type
  • Protective Characteristics: Open Relay
  • Load: Micro Power Relay
  • Number of Pole: 2

Electronic Counters With Preset

Approx Price: Rs 5,000 / Unit 
  • Upgraded counting speed: 1 cps/30 cps/2 k cps/5 k cps
  • Selectable voltage input(PNP) or No-voltage input(NPN)
  • Upgraded counting speed: 1 cps/30, cps/2 k, cps/5 k cps
  • Decimal point setting (Fixed decimal point of display)
  • Upgrade counting speed: 1 cps, 5 k cps
  • Selectable voltage input(PNP) or no-voltage input(NPN): Memory protection for 10 years (Using non-voltage semiconductor)


Digital Timer

Approx Price: Rs 5,000 / Unit 
  • Size: Miniature
  • Dimension: 123X51X51
  • Supply Voltage: AC 36 V, 110 V, 127 V, 220 V, 380 V, DC 24 V

Digital Panel Meter

Approx Price: Rs 5,000 / Unit 
  • Auto zero function or hold function(Except for M5W)
  • Indicator, single preset output type, Dual preset output type.
  • Input: DC4-20 mA(Output specification of power factor transducer)
  • Display: -0.50 to 1.00 to 0.50


Tacho/Speed/Pulse Meter

Approx Price: Rs 2,000 / Unit 
Indication only, LCD pulse meter(RPM, RPS, Hz):
  • Easy of 1 pulse input method per 1 revolution
  • No need power supply by internal battery


High-performance, Digital Pulse Meter MP5Y series:

  • 13 kinds of various operation modes :Revolution, speed, frequency, absolute ratio, passing time, error ratio, cycle, density, passing speed, error, time width, length measurement, time difference, interval multiplication.


High-performance, Digital Pulse Meter MP5M series:

  • Various functions: Prescale function, data monitoring function, hysteresis function, peak value monitoring function, monitoring delay function, auto zero time setting function, lock setting function, display period delay function.


High-performance, Digital Pulse Meter MP5S series:

  • Various output function :Relay output, NPN/PNP open collector output, low speed serial output, BCD output,PV transmission, RS485 communication output.


High-performance, Digital Pulse Meter:

  • Various display units : rpm, rps, Hz, kHz, sec, min, m, mm, mm/ s, m/s, m/min, m/h, /s, /min, /h, %, counts, etc.
  • Selectable voltage input(PNP) or no voltage input(NPN)
  • 50 kHz high speed response



  • Power Supply: 90-260 V AC/DC 50/60 Hz Power Comsump.
  • Display: Digital
  • Frequency Range: Universal Frequency




Display Units

Approx Price: Rs 2,000 / Piece 
  • Material: Acrylic
  • Display Place: Indoor and Outdoor
  • Antitheft: Antitheft
  • Color: Clear

Sensor Controller

Approx Price: Rs 2,000 / Unit 
  • High speed input response
  • Flip-flop mode for level control
  • Multifunctional unit with timer mode
  • DIN rail, Mounting to panel


  • 13 kinds of various operation modes selected by DIP switches
  • Wide range of power supply 100-240 V AC 50/60 Hz
  • Selectable use of 110/220 V AC
  • Selectable use of NPN, PNP inpu
  • Able to drive loads up to 3 A, 250 V AC with proximity sensor or photo sensor input.
  • Convenient to mount on socket by plug in type
  • Output relay with both N.O. and N.C. contacts

Switching Power Supply (DC) Module

Approx Price: Rs 5,000 / Piece 
  • Built-in overcurrent protection, output short-circuit protection,overheating and overvoltage protection circuits(SPA-075/100)
  • Standard on safety IEC 60950, IEC 50178
  • EMS(Electromagnetic susceptibility) EN61000-6-2
  • EMI(Electromagnetic interference) EN61000-6-4
  • Output voltage: 5 V DC, 12 V DC, 24 V DC
  • Output current: 30 W, 50 W, 75 W, 100 W

Programmable Digital Encoders

Approx Price: Rs 10,000 / Unit 
Our products in the category of programmable encoders.

FNC 58 series programmable:
  • Clamping servo end hollow shaft flange versions
  • Robust mechanical and electrical construction
  • Resolution: Upto 65.536 PPR max
  • <= 2 Mhz frequency
  • Programming via FNC PT-PC programming tool
  • FNC PT-PS easy programming software

FNC 58 series 2 channel Programmable:
  • Industry 58 mm standart size
  • Clamping-servo-end hollow flange versions
  • Robust mechanical and electrical construction
  • Protection to IP67
  • Up to 65.536 PPR max
  • <2 kHz frequency
  • Programming via FNC PT-PC Programming tool
  • FNC PT-PS easy programming software



  • Resolution: 0.024 mm/Pulse
  • Accuracy: 0.05%FS
  • Input voltage: 5-24 V, 24 V, 5 V

Wire Encoders

Approx Price: Rs 10,000 / Unit 
Our products in the category of wire encoders:
  • 6 Meter wire encoder
  • 2 Meter wire encoder
  • 15 meter encoder



  • Linearity: 0.05%Fs
  • Resolution (Mm): 0.2, 0.33, 0.08, 0.016, etc
  • Power Configuration: Push-Pull / Long Line Drive / NPN Open
  • Size: 93.5 mmx50 mmx40 mm
  • Material: Metal
  • Encoder: 1000 pulse, 2000 pulse, 2500 pulse, 5000 pulse, etc
  • Stroke Range: 0-1000 mm



Encoder Accessories

Approx Price: Rs 10,000 / Unit 
The accessories that we provide along with our primary products:
  • Paguflex coupling
  • Plastic Coupling
  • Metal Coupling
  • Stainless Steel Coupling



  • Length: 25 mm
  • Hole Diameter: 6
  • Attachment: Spanner


Konica A Series AC Drives

Approx Price: Rs 4,500 / Piece 
Being a quality conscious organization, this is committed to offer qualitative range to our clients we present Konica A Series AC Drives that are easy to install and have simpler configuration. Their controls are able to provide the user with necessary adjustments like minimum and maximum speed settings etc, so that the drive can be adapted to the user's process. We bring this range in simpler form with highly economical range for the clients’ convenience.

  • Superior function of IGBT and the core of high speed calculation have AC motor speed controller be more ideal and more reliable
  • Standard RS 485 port can remotely control in convenience
  • Built-in Simple PLC and PID Simplify circuit designation
  • Various control mode satisfies requirement in different applications
  • Simple interlace
  • Great output torque


  • Ambient Temperature: -10 C to +45 C (Bare Machine: -10 C to+50 C)
  • Vibration: <0.5 g
  • Protection Class: IP20

Tamagawa Resolver

Approx Price: Rs 5,000 / Piece 
  • Type: TS2610N171E64
  • Pole of Pairs: 1
  • Input Voltage: 7 V(AC)
  • Input Frequency: 10 KHz
  • Accuracy: /-10'
  • Phase Shift: 5 Degree
  • Operationg Temperature: -55 Degree, c 155 Degree c, -67 Degree F 311 Degree F

Additional Information:
  • Item Code: 10
Looking for Industrial Automation ?
© Konica Automation
Desktop Site Back to top